Description
About the Product : You can check our https://www.isitmax.com/rampa-ve-yol-isitma/ address for detailed information about our snow ice prevention product in the form of a wheel track at ramp and parking entrances. This page contains the information you will need before purchasing.
Note : Heating applications under concrete for the purpose of preventing snow and ice outdoors can cover a wide range of usage areas. This page describes ramp heating in the form of a wheel track. You can check our https://www.isitmax.com/merdiven-isitma-don-onleme-siltesi/ page for factory loading ramps, hospital service entrances, multi-lane specifications that are planned to heat the entire floor. If the installation will be done to the wicker equipment or if the existing floor will be made by placing heating cables in the channels opened by cutting the apartment saw, you can examine our product https://www.isitmax.com/beton-alti-yerden-isitma-kablosu/ .
Mattress Eni : Concrete / asphalt heating cables for snow ice prevention purposes are placed in certain forms as fabrication in carrier mesh (easymat) or mounting tapes (promat). En:50cm mattresses are ideal for the wheel size of cars. The 100cm mattresses are ideal for ramps with wider axle distance, such as cars (those that want to heat in a larger area) or heavy vehicles.
Traffic: Heating mattresses are placed in accordance with the axle distance of the vehicle types that will use the ramp. You can make the following selections based on the number of ribbons. Illustrations have been added so that you can better understand the relevant selections in the product images.
- Single Lane Road: 2 50cm or 100cm mattresses are sent on single-vehicle roads to correspond to the right and left wheel trail of the car. Axle distance, connections fabricated by ISITMAX. You can only place mattresses by leaving the appropriate space from the side walls (centering the ramp).
- Double Lane Road: In the form of round trips and arrivals, 4 rows of heating are made on the ramps where 2 cars operate at the same time, with 2 rows of mattresses per vehicle. 4 50cm or 100cm mattresses are sent. Axle distance, connections fabricated by ISITMAX. You can only place mattresses through the side walls and leaving the appropriate space between the two cars (centering the ramp).
Ramp Length : After deciding on the length of the heating mattresses, it should be decided. ISITMAX prepares one piece mattress at 50cm (max.24metre), 100cm (max.12metre). The mattress needed for more feature films is designed and shipped by ISITMAX. You can enter your length regardless of the number of mattresses during the order. Heatmax will decide the number of mattresses. At this point, as the number of mattresses increases, your electrician will need to put distribution buats on the mattresses to carry electricity.
Temperature Control: Your underfloor heating system should be controlled by thermostat and sensor. At this point, different control units come to the fore.
- Ekoline Series Control Panel : It is surface mounted. It comes with a rail type digital thermostat and temperature sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. The system works when the air temperature drops below +2C, and turns off when it rises above +3C. This setting is standard by default. It can be changed easily.
- Proline Series Control Panel : Even if the weather is below zero degrees, there may be no icing. In this case, the heaters will work in vain. To prevent this, an extra humidity sensor is added to the temperature sensor. It is surface mounted. The rail type digital thermostat comes with a temperature sensor and an external humidity sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. When the air temperature drops below +2C and the humidity sensor detects precipitation, the system starts up, and when the temperature or humidity sensor presents appropriate values together, the system shuts down. This setting is standard by default. It can be changed easily.
- Maxline Series Control Panel : It has the same features as Proline series control panel. The temperature regulator and sensors used in the panel are EBERLE brand. Eberle comes as a set with temperature regulator , temperature sensor , humidity sensor, floor temperature sensor .
Connection Junction: One junction box must be used for every 15m2 heating area. Considering your total heating area, you can order the required amount of junction boxes.
Installation: Our under-concrete heating systems and the selections are sent ready for installation. If you see fit, you can add our in-Istanbul assembly service to your order. For out-of-town applications, it may be necessary to contact our dealers and obtain exploration and assembly information.
GUARANTEE
We offer 3 guarantees for our outdoor under-concrete underfloor heating product.
- 20 Years SAFEMAX Warranty: Our Under-Concrete Heating Cables (TmaxPro) for Snow and Ice Prevention are produced with the engineering and raw material infrastructure required for at least 30 years of operation under concrete in an airless and still environment. Therefore, after installation, your flooring will continue to do its job until you change it. In case of a manufacturing defect, product replacement (construction works belong to you) or refund (up to the invoice amount) is contractually determined in line with our SafeMax Warranty procedure. We are proud that we have not had any defective products since 1995.
- Thirty-day Return Guarantee: You can return the product you purchased within 30 days in case of an unopened box, wrong order, abandoned product or a problem caused by us. Special order products are not included in this scope.
- Best Price Guarantee: As Isitex, we are very confident in our products and prices. If you want to trust us and buy the same product from us, even though we are more expensive; please let us know where you got a better price ( info@isitmax.com ) we promise to reduce our competitor’s price to one click symbolically. If you would like more detailed information about warranties, please visit our SafeMax Page .
Note: You can rotate your heating mat by cutting it or remove the cable from the conveyor belt and change its location during assembly. Even if there are slight deviations in your size, you can continue to lay.
Note: Heatingx, which has been manufacturing and installing heating cables since 1995; It offers its products as a set that is very easy to lay and hassle-free. You can easily install your system yourself or with the help of an electrician.
