Description
About the Product: For detailed information about our under-concrete underfloor heating product, you can visit our address: https://www.isitmax.com/rampa-ve-yol-isitma/ . This page contains the information you will need before purchasing.
Note : Heating applications under concrete for the purpose of preventing snow and ice outdoors can cover a wide range of usage areas. Especially if ramp heating in the form of ruts is desired, our page https://www.isitmax.com/rampa-teker-izi-isitma-siltesi/ would be the right choice. Likewise, https://www.isitmax.com/merdiven-isitma-don-onleme-siltesi/ is the area where we sell customized heating systems for stairs and building entrances.
Note : Heating under concrete is basically done in 3 ways. By laying heating mats on the existing concrete / sand etc. floor, by assembling the heating cables to the metal mesh reinforcements on the floor, or thirdly, by making cuts on the existing floor with a circular saw and placing the heating cables in these channels.
Our product introduced on this page is suitable for the following installations.
- Installation of heating cables on mesh reinforcement
- Opening channels with a circular saw on the existing concrete or asphalt floor and laying the heating cables in these channels
- For small areas that are round or have a lot of indentations
In terms of ease of assembly, if you are going to be mounted on a flat area such as sand / concrete, etc., you can examine our Concrete Underfloor Heating Mattress product.
Heating Area Selection: Before installing a heating system, you must determine your heating area. The system will select the cable quantity you need from the database according to the selected heating area. If you wish, you can get support from our phone number 0850 888 8110 or our Outdoor concrete underfloor heating cable installation guide page.
Heat Power: We produce 300, 325, 350Watt / m2 powers as standard. These heat powers meet all heat power and technical specifications under the conditions of our country. We can optionally manufacture up to 500Watt / m2 power for special requirements such as heat powers, which are deemed appropriate in the technical specifications, in some parts of the Nordic countries (Russia etc.) or Eastern provinces. What heat power to choose; The thickness of the concrete thrown may vary according to geographical conditions and technical specifications. From an engineering point of view, the architectural project, local weather forecasts and floor plans are sufficient criteria to make a more accurate choice. In this direction, you can get support from ISITMAX when choosing HEAT POWER in line with the application experience we have gained from hundreds of projects in many countries, especially in our country, our weather forecasting applications and technical specifications since 1995.
Generally for heaters located 5-10cm from the surface;
You can base Istanbul, 300Watt/m2, Ankara, 325Watt/m2, Erzurum 350Watt/m2.
Temperature Control: Your underfloor heating system should be controlled by thermostat and sensor. At this point, different control units come to the fore.
- Ekoline Series Control Panel : It is surface mounted. It comes with a rail type digital thermostat and temperature sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. The system works when the air temperature drops below +2C, and turns off when it rises above +3C. This setting is standard by default. It can be changed easily.
- Proline Series Control Panel : Even if the weather is below zero degrees, there may be no icing. In this case, the heaters will work in vain. To prevent this, an extra humidity sensor is added to the temperature sensor. It is surface mounted. The rail type digital thermostat comes with a temperature sensor and an external humidity sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. When the air temperature drops below +2C and the humidity sensor detects precipitation, the system starts up, and when the temperature or humidity sensor presents appropriate values together, the system shuts down. This setting is standard by default. It can be changed easily.
- Maxline Series Control Panel : It has the same features as Proline series control panel. The temperature regulator and sensors used in the panel are EBERLE brand. Eberle comes as a set with temperature regulator , temperature sensor , humidity sensor, floor temperature sensor .
Connection Junction: One junction box must be used for every 15m2 heating area. Considering your total heating area, you can order the required amount of junction boxes.
Installation: Our under-concrete heating systems and the selections are sent ready for installation. If you see fit, you can add our in-Istanbul assembly service to your order. For out-of-town applications, it may be necessary to contact our dealers and obtain exploration and assembly information.
GUARANTEE
We offer 3 guarantees for our outdoor under-concrete underfloor heating product.
- 20 Years SAFEMAX Warranty: Our Under-Concrete Heating Cables (TmaxPro) for Snow and Ice Prevention are produced with the engineering and raw material infrastructure required for at least 30 years of operation under concrete in an airless and still environment. Therefore, after installation, your flooring will continue to do its job until you change it. In case of a manufacturing defect, product replacement (construction works belong to you) or refund (up to the invoice amount) is contractually determined in line with our SafeMax Warranty procedure. We are proud that we have not had any defective products since 1995.
- Thirty-day Return Guarantee: You can return the product you purchased within 30 days in case of an unopened box, wrong order, abandoned product or a problem caused by us. Special order products are not included in this scope.
- Best Price Guarantee: As Isitex, we are very confident in our products and prices. If you want to trust us and buy the same product from us, even though we are more expensive; please let us know where you got a better price ( info@isitmax.com ) we promise to reduce our competitor’s price to one click symbolically. If you would like more detailed information about warranties, please visit our SafeMax Page .
Note: You can rotate your heating mat by cutting it or remove the cable from the conveyor belt and change its location during assembly. Even if there are slight deviations in your size, you can continue to lay.
Note: Heatingx, which has been manufacturing and installing heating cables since 1995; It offers its products as a set that is very easy to lay and hassle-free. You can easily install your system yourself or with the help of an electrician.
- More About Asphalt and Concrete Underfloor Heating Cable
ISITMAX Asphalt and Concrete Underfloor Heating Cable is used for snow-ice melting on roads and ramps. It melts the snow and ice that make transportation impossible in regions with adverse weather conditions, both saves the regions from isolation and provides safe transportation.
It is necessary to choose ISITMAX Asphalt and Concrete Underfloor Heating Cable by paying attention to factors such as the physical location of the area (the amount and duration of sunlight it receives, the windfall situation, etc.), the quantity of need (the duration of snow and ice prevention, etc.), the automatic operating times of the system. For example, high-power cables (350-450W/m 2 ) in regions with heavy snowfall should be preferred; In areas exposed to freezing accelerating factors, cables with increased strength should be used.
It is possible to minimize heat losses by using heat insulation material as well as ISITMAX Asphalt and Under-Concrete Underfloor Heating Cable on roads and ramps outside the places where there is vehicle passage. In places where there is vehicle passage, since insulation cannot be made, cables with increased power should be used.
If ISITMAX Underfloor Heating Cable is to be used under asphalt, it is necessary to cover the cable with 2 cm of sand/concrete, and to pour the asphalt after cooling (130 degrees). Other important points to consider are that heavy machinery should not be used on the cables and that at least 5 cm of asphalt should be laid on the cable.
When ISITMAX Underfloor Heating Cable is to be used under concrete, the cables must be attached to the mounting elements or steel mesh, and the poured concrete should cover the entire area after it has been waited and rested for a sufficient time.
