Description
In order to protect the foundations and floors that will be deformed due to the cold air spreading from your cold storages operating at -30 to -40 degrees, you can lay an ISITMAX Cold Room Underfloor Heating Mattress in the relevant areas and prevent possible disruptions.
Our underfloor heating mattresses designed to be used under concrete in your projects that are newly built or in the process of renovation; It is an application that must be done in order to prevent the deformation of the cold room floor, as well as to carry materials and to be able to move comfortably inside. The system consists of laying the pre-prepared heating mats on the floor and applying at least 5 cm of concrete, screed or flooring mortar on it. Heating mattresses prepared with fabricated cold end technology in accordance with the project are mounted on the ground in the field. The system is completed with the placement of the floor sensor, the installation of the control panel and the thermostats. Sensors that automatically measure the temperature on the floor turn the system on and off to bring the system to the determined floor temperature. In this way, the damage to the flooring caused by the frozen air is prevented and the safe circulation of the personnel in the entrance and exit areas is ensured.
Even if insulation is made in cold storage rooms and ice skating rinks with similar functioning, the cold reaches the outside, the moisture in the outdoor soil cools and freezes, causing destruction. It is now possible to prevent this destruction with ISITMAX Cold Room Underfloor Heating Mattresses! You can use underfloor heating mats, which are very simple and practical to install, in flat and wide areas. If the area is narrow and angular, you can choose to use ISITMAX Cold Room Underfloor Heating Cables.
Control panel, thermostat and temperature sensors are added to the ISITMAX Cold Room Underfloor Heating Mattresses, which are produced in 50 cm and 100 cm dimensions, making the system more sensitive. You can choose from our heater mattresses, which are produced in 2 different sizes according to the width and length of the area to be heated. Fabricated mattresses with a width of 50 cm or a width of 100 cm provide ease of assembly. Especially the fact that the mattresses used to carry the cable can be cut and placed according to the condition of the floor is a great convenience for spreading the heat to the floor. The most important advantage of heating mattresses is that the heating cables are fabricated on the mattress in order to provide the desired Watt power per square meter, thus ensuring that the system is properly positioned before the concrete is poured. At this point, it may be harmful to use gravel concrete on the mattresses during the concrete pouring phase or to use thick concrete that will disrupt the order of the cables. It is a more secure approach to put a thin layer of fluid stone-free concrete until the mattresses are covered, or to cover the screed before the concrete.
The purpose of the ISITMAX Cold Room Underfloor Heating Mattress is to maintain the temperature of the area under the insulation. For this reason, in order to achieve the desired result, the system must be laid at least 5 cm below the elements used in the insulation.
Thanks to their flexible and bendable structures, ISITMAX Cold Room Underfloor Heating Mattresses, which are assembled within a few hours, are produced with today’s technology, do not require maintenance, and can be used safely for a lifetime.
You can safely use Heatingx products in your business with the experience we have gained from the cold storages where we have been performing underfloor heating since 1995.
regards
