Is Ground Heating Done AfterWards?
Humanity has had questions about how to warm up in every date and period and has answered this in different ways. Today, there are many different methods for achieving warming, but humanity’s excess consumption in different areas leads to the depletion of energy sources. This problem jeopardizes our future. Today, the priority of humanity is to ensure maximum efficiency with minimal energy resource consumption. There are many factors that are considered when choosing the method of heating of buildings and other uses. While efficiency is at the forefront of this, cost and functionality are other considerations. Underfloor heating is one of the preferred and well-known heating methods, especially in recent years, since it provides excess efficiency with a small unit of energy. Among the most curious questions about the underfloor heating method, which is laid on the floor and has a complex structure, is whether underfloor heating can be done afterwards. In this article, we tell you what underfloor heating is and how it is done, whether it can be done later.
What is Underfloor Heating?
The radiator heating system transmits hot air up. This prevents the uniform distribution of the temperature in the room and transmits the heat mostly to the walls and ceilings. Underfloor heating means that the heating in the room or area is transmitted from the floor by pipes laid on the floor. In this way, many customers’ problems of not evenly distributing the heat are solved. The underfloor heating system, which gives the heat from the ground, provides a homogeneous heat dissipation. Cables or pipes are laid on the floor for heating to take place. The method of using electrical energy and resistance cables is one of the options of underfloor heating. Another option is based on the circulation of water heated in an external source through the pipes.
In short, there are two methods of underfloor heating. One of them can be called electric underfloor heating and the other can be called water heating. Underfloor heating systems have become preferred in residential units due to their reliability and low cost. In addition, it is used in large areas such as hammams and stadiums.
Cables or pipes used in the underfloor heating system are evenly laid on the entire floor. This system is ideal for evenly dispersing heat. The heat from the ground rises in the air and spreads throughout the room. The efficiency from unit energy is high. No one wants to stay in a cold room. The main problem with heating problems is that one area is warming up enough and the other is not.
In underfloor heating models, all cables or pipes laid on the floor are collected in the collector. The collector, where pipes in different areas are collected, has valves to prepaid the pressure passing through these pipes. Thus, the valve is reduced in the rooms where the heat is desired to remain low, saving is achieved. For example, people with a nursery probably want this room to always be at the ideal temperature. This is possible thanks to the collectors, where the pressure is shown and controlled. Underfloor heating system, where the need for heat is met by using a moderate amount of electricity or water energy, is often preferred by everyone. One of the questions about the underfloor heating system is how it is laid.
How to Install a Ground Heating System?
We said that the underfloor heating system was basically laid in two ways. One of them is an electric underfloor heating system and the other is an aqueous underfloor heating system. The electric underfloor heating system draws its power from electricity. It is applied to the flooring from the closest point to the ground during the construction phase of the building or in transformation projects. It is divided into cable and mattress system. Cables are used on more protruding or rounded floors, allowing heat to reach every point. Mattresses are larger scale and are used more often due to ease of installation in large and angular geometric areas such as halls or kitchens. The cables or mattresses laid on the floor are covered with flooring mortar or leveling component. The floor to be laid on cables or pipes is also important for underfloor heating. The conductivity of heat will vary in parquet, ceramic or carpet coatings. Professional persons and institutions can decide what type of flooring to use according to the size of the area to be heated from the ground and the material to be used on the floor.
Underfloor heating equipment is usually made when the structures are under construction. The fact that the structure is under construction is ideal as it will facilitate the determination of the square meter, the cladding flooring to be used and other factors. Ground connection equipment is installed before screeding in order to make the heating cables strongly connected to the floor.
In this way, cables or pipes are kept intact. Thanks to the valves and flow indicators in the collector, the temperature of each room can be adjusted. Regardless of the flooring, the pressure inside the pipes passing under the ground is also controlled by collectors. The problem with any pipe can be solved without shutting down the entire system. Thanks to collectors, only the problem area can be studied and other areas are not disturbed.
Is It Possible to Heat From the Ground AfterWards?
Underfloor heating systems can be installed by the owner, electrician or application companies. In small areas such as one room, the owner can install the system together with the materials and manuals sent appropriately to the area where the dimensions are previously communicated. Electricians can be called in to install the system in larger areas and to take care of detailed work. For an underfloor heating system to be applied throughout the house, it is recommended to choose the application company that will take care of all the processes. It is important that the installation is carried out by professionals in order to carry out all the procedures in full.
When safely selected and tested materials are placed correctly on the floor, a long-lasting use is ensured. Compared to other warming methods, the maintenance and cost of the ground heating system is almost nonexistent. In any bit problem, the whole system is not damaged by looking at the problem area.
It is advantageous to consider geographical conditions, choose the appropriate method for ambient temperature and decide on the flooring material. Underfloor heating system is a stand-alone heating system for comfort purposes and can be used as an additional heating system in very cold geographies or areas where heating is inadequate. Although underfloor heating systems are usually applied to the building under construction, it is also possible to install the underfloor heating system afterwards. With the end of rough construction, underfloor heating systems, which can be easily applied to these areas with the advantage of evaluating every possibility, can also be easily applied to the living spaces of customers who change their decisions later.
What is required to get heating from the ground afterwards?
In accordance with the building laws, it is a legal obligation to make an electrical leakage relay in the building where underfloor heating will be applied. Buildings are licensed after such checks. Underfloor heating system can be installed by the owner, electrician or application company in the buildings with licenses without any problems. In case of possible short circuit, the electrical and insurance applications controlled in the buildings cut off the electricity. In this way, the risks of problems in other heating methods such as fire or gas leakage are minimized.
People who will then get underfloor heating should pay attention to whether the building has such permits. Then, the authorized application company can be contacted by taking the measurement of the rooms where underfloor heating will be applied. In terms of long-lasting use of the underfloor heating system and its smoothness, it is recommended that their installation be carried out by the application companies.
You can reach our previous article from https://www.isitmax.com/yerden-isitma/ link.
