Description
Heating industrial barrel heating jackets are one of the highest quality and purpose-built barrel heating solutions in our country with 15 years of sales experience and countless satisfied customers. Suitable for 200-220lt barrels and can also be produced according to customer requests. Heating barrel heating jackets are especially suitable for melting soaps, solid oils, varnishes and oil-based products or reducing their viscosity.
Product Structure
Heating barrel heating jackets are designed for industrial conditions, temperature values needed by the industry and especially longevity, and have been continuously improved for many years according to customer returns.
- It has a fireproof inner sheath and stain-keeping outer sheath.
- For years, kevlar seams and iron clasp suitable for intensive dismantling distinguish the product from its counterparts.
- The control equipment developed by Heatmax is simple and stable, allowing staff to easily adjust the temperature.
- Aluminum layered, Silicone insulated, glass fiber mesh heating element kevlar seams mounted on the jacket, providing high level of smoothness.
- Thanks to special double layer carbon insulation, rapid heating, safety level is increased.
- It offers wide solutions to industrial needs with 1000Watt and 2000Watt models.
Product Dimensions
Barrel – Heat Power – Product Size – Suitable Diameter Range
200lt – 1000watt – 1950x800mm – 573 – 621mm
200lt – 2000watt – 1950x800mm – 573 – 621 mm
Technicial Specifications
Max. Jacket Temperature : 90 °C
Mains / power : 230 V
Inner Case : Silicone / Glass Fiber
Outer Sheath: Waterproof polyester fabric
Heat Insulation : Carbon Fiber
Protection Class : II
Plug Length : 3 meters
Buckle: Steel buckle and polyester strong palaska
Thermostat : 0-120C precision digital controlled thermostat and control unit
Control Range : 0 – 120 °C
Heating Zone :
P1000 – 1 zone / whole surface warms up
P2000 – 2 zones / whole surface warms up
Power Option : P1000 (1000Watt) ,P2000 (2000Watt)
Special measurement and power options: Yes, Optional
Safety Instructions
1. Read all instructions before using the heater.
2. Unplug the power cord when not in use.
3. Do not immerse the heater in liquids.
4. Do not touch the surface of the heater during operation. After turning it off, allow the heater to cool completely before use.
5. Use the heater only for the purpose of use as described in these instructions.
6. Cut the power supply before removing the terminal cover.
7. The heater should not be used if it is damaged in any way. If the power cord is damaged, it must be replaced by the manufacturer or a similarly qualified person using a special flexible cable to avoid danger.
8. The heater must be connected to the electrical source via a leakage current device or other equipment that protects against electric shock.
9. During operation, take the air out of the barrel to prevent internal pressure from forming.
Electrical Requirements
Check that the voltage marked on the heater is suitable for the electricity source to which it should be connected AC (Alternating Current). The heating barrel heating jacket is of a double insulated structure, so it does not require soil connection. A suitable and approved plug for the country in which the heater is used must be plugged into the power cord by a suitable qualified person.
Operating Instructions
1. Storage solutions can be plastic or metal. Do not opt for products over 1000 watts for plastic barrels. Although 1000 Watts is suitable for frost prevention for steel barrels, you can choose 2000 Watt products for process heating purposes.
2. Place the barrel heating jacket around the barrel with the fastening straps above and the ISITMAX logo in readable form. remove the gap of all 3 generations by passing the connection belts through the iron clasp. After combining the upper fastening belts, stretch the belts to ensure that the barrel heater is finalized. Make sure that the jacket does not touch the ground and that there is no gap between it and the barrel.
3. Set the thermostat to the required temperature. NOTE: The thermostat sensor is positioned to detect the temperature between the heater surface and the barrel, not the barrel contents. obtaining the ideal temperature of the barrel contents is achieved by the experience depending on the use.
4. Plug the heater into the power supply. The red LED indicates that it is “ready to work”.
5. The heater jacket will start to warm up and continue until the required temperature set by the thermostat is reached. Next, the thermostat will loop at this setting point until the setting changes or the heater leaves the power supply. During the warm-up process, the orange LED lights up.
6. Turn off the heater and remove from the barrel before emptying the contents. This will prevent the heater from getting dirty from debris.
Cleaning and storing
Always separate the heater from the power supply before cleaning. Wipe the jacket and terminal box with a damp cloth. Do not use solvents or astringents and never immerse the heater in liquid. When not in use, the heater can be folded for storage. Do not wrap tightly with a diameter of 150 mm. For more information about usage or service, contact the manufacturer or supplier.
References
- Yılport Holding INC
- IQF KİMYA SANAYİ TİC LTD ŞTİ
- MIMOSA KIMYA KOZMETIK SANAYI VE TICARET LIMITED SIRKETI
- HEALTHY BARS LTD
- CADI MARBLE INDUSTRY AND TRADE LIMITED COMPANY
- BİKAR İLAÇ SAN ve TİC A.Ş.
- Cargill Food META
- SASA Polyester San. Inc.
- Polimed İlaç ve Tav. Trade and San. Ltd. Sti.
- Agora Chemistry Group
- VISCOL PETROLEUM
- Acacia Maden İşletmeleri A.Ş.
- BELGİN MINING OILS TRADE. and SAN. Inc.
- ROVA Kimya Kozmetik İlaç Temizlik San. ve Tic. Ltd. Sti
- İDEAKİM
- Tosyalı Holding
- Polimer Arge Plastic San. ve Tic. Inc.
- Olgun Çelik Sanayi ve Ticaret A.Ş.
- EGGER Dekor A.Ş.
- COROZO
- Bellice Group Kimya San. ve Tic. Inc.
- HAFF KİMYA SAN. TRADE. Inc.
- SPİNTEKS TEKSTİL.İNŞ.SAN.VE TİC.AŞ
- Kosan Kozmetik San. and Tic. Inc.
- ANADOLU ASLANI DRILLING CONTRACTING AND TRADE INC.
- ESAN ECZACIBAŞI ENDÜSTRİYEL HAMMADDELER SAN. AND TRADE Inc.
- NEFHA KİMYA INDUSTRY TRADE LIMITED COMPANY
- Sarten Ambalaj San. And Trade. Inc.
- Değer Kimya ve Tekstil San. Trade Inc.
- Klimasan Air Conditioning Industry and Trade Inc.
- Döhler Gida San. AS
- UZMAR Shipbuilding Industry. and Tic. Inc.
